超快光纤激光相干合成技术是突破飞秒激光单根光纤功率提升受限的有效技术手段。基于光纤拉伸器锁相，并结合随机并行梯度下降（SPGD）算法，成功实现了两路超快激光相干偏振合成。该锁相方案不仅避免了采用常规电光相位调制器对脉冲信号造成的光谱调制，而且可有效降低系统的插入损耗，提高相位调制范围、耐受功率以及前级光源系统的紧凑性与鲁棒性。合成的最高功率为10.9 W，最高功率下合成效率为90.1%，闭环状态下锁相残差为λ/31。实验结果表明，采用光纤拉伸器和SPGD算法组成的相位控制系统，在超快激光相干合成领域具有较强的发展潜力。合成的脉冲在最高功率下可压缩至494 fs，压缩效率为73.3%，对应的单脉冲能量为3.99 μJ。

We report a compact, tunable, self-starting, all-fiber laser-based asynchronous optical sampling (ASOPS) system. Two Er-doped fiber oscillators were used as the pulsed-laser source, whose repetition rate could be set at 100 MHz with a tuning range of 1.25 MHz through a fiber delay line. By employing phase-locked and temperature control loops, the repetition rate offset of the two lasers was stabilized with 7.13 × 10^-11 fractional instability at an average time of 1 s. Its capabilities in the terahertz regime were demonstrated by terahertz time-domain spectroscopy, achieving a spectral bandwidth of 3 THz with a dynamic range of 30 dB. The large range of repetition rate adjustment in our ASOPS system has the potential to be a powerful tool in the terahertz regime.

Gain-parameter-dependent transfer functions and phase-noise performances in a mode-locked Yb-doped fiber laser are measured in this study. It is discovered that the corner frequency in the amplitude and phase domains is determined by the absorption coefficient of the gain fiber, when the total absorption and other cavity parameters are fixed. This shows that an oscillator using gain fiber with higher dopant concentration accumulates more phase noise. Furthermore, we present net cavity dispersion-dependent transfer functions to verify the effect of dispersion management on the frequency response. We derive a guideline for optimizing mode-locked fiber laser design to achieve low phase noise and timing jitter.

We report on the generation of a mid-infrared (mid-IR) frequency comb with a maximum average output power of 250 mW and tunability in the 2.7–4.0 μm region. The approach is based on a single-stage difference frequency generation (DFG) starting from a compact Yb-doped fiber laser system. The repetition rate of the near-infrared (NIR) comb is locked at 75 MHz. The phase noise of the repetition rate in the offset-free mid-IR comb system is measured and analyzed. Except for the intrinsic of NIR comb, environmental noise at low frequency and quantum noise at high frequency from the amplifier chain and nonlinear spectral broadening are the main noise sources of broadening the linewidth of comb teeth, which limits the precision of mid-IR dual-comb spectroscopy.

We report on a compact and robust self-referenced optical frequency comb with a tunable repetition rate, generated by an all-polarization-maintaining (PM) mode-locked Er-doped fiber laser. The spacing between comb teeth can be tuned above 300 kHz at a repetition rate of 101 MHz. The repetition rate and the carrier–envelope offset of the laser are stabilized separately, and the relative residual phase noises are determined to be $336~\unicode[STIX]{x03BC}\text{rad}$ and 713 mrad (1 Hz–1 MHz). The accurate frequency characteristics and the stable structure show great potential for the use of such a comb in applications of precision measurements.